ISO-10303-21;
HEADER;
/****************************************************************
 * Generated by software with PDElib inside                    *
 * PDElib Version v51a, created Tue 11/30/2010                  *
 * ITI Transcendata (http://www.transcendata.com/)              *
 ****************************************************************/
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('C:\\Users\\Keith\\Documents\\Inventor\\Allectra\\00AL-0500-0749\\AL-730a.stp','2013-07-03T10:56:44',('Keith'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
ENDSEC;
DATA;
#5=APPLICATION_CONTEXT('automotive design');
#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
#7=PRODUCT_CONTEXT('',#5,'mechanical');
#8=PRODUCT('AL-730','AL-730',$,(#7));
#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
#12=PRODUCT_DEFINITION('',$,#10,#11);
#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
#39=DIRECTION('',(0.0,0.0,1.0));
#40=DIRECTION('',(1.0,0.0,0.0));
#41=SHAPE_REPRESENTATION('',(#37,#386,#877,#1164,#1331),#36);
#42=PRODUCT_DEFINITION_SHAPE('','',#12);
#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
#44=APPLICATION_CONTEXT('automotive design');
#45=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#44);
#46=PRODUCT_CONTEXT('',#44,'mechanical');
#47=PRODUCT('x_f_pres_burst_disk_02','x_f_pres_burst_disk_02',$,(#46));
#48=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#47));
#49=PRODUCT_DEFINITION_FORMATION('',$,#47);
#50=PRODUCT_DEFINITION_CONTEXT('part definition',#44,'design');
#51=PRODUCT_DEFINITION('',$,#49,#50);
#57=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#58=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#59=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#57);
#63=(CONVERSION_BASED_UNIT('DEGREE',#59)NAMED_UNIT(#58)PLANE_ANGLE_UNIT());
#67=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#71=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#73=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#71,'DISTANCE_ACCURACY_VALUE','');
#75=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#73))GLOBAL_UNIT_ASSIGNED_CONTEXT((#63,#67,#71))REPRESENTATION_CONTEXT('None','None'));
#76=AXIS2_PLACEMENT_3D('',#77,#78,#79);
#77=CARTESIAN_POINT('',(0.0,0.0,0.0));
#78=DIRECTION('',(0.0,0.0,1.0));
#79=DIRECTION('',(1.0,0.0,0.0));
#80=SHAPE_REPRESENTATION('',(#76),#75);
#81=PRODUCT_DEFINITION_SHAPE('','',#51);
#82=SHAPE_DEFINITION_REPRESENTATION(#81,#80);
#88=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#89=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#90=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#88);
#94=(CONVERSION_BASED_UNIT('DEGREE',#90)NAMED_UNIT(#89)PLANE_ANGLE_UNIT());
#98=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#102=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#104=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#102,'DISTANCE_ACCURACY_VALUE','');
#106=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#104))GLOBAL_UNIT_ASSIGNED_CONTEXT((#94,#98,#102))REPRESENTATION_CONTEXT('','3D'));
#107=CARTESIAN_POINT('',(29.262500000000003,0.0,12.5));
#108=DIRECTION('',(0.0,0.0,-1.0));
#109=DIRECTION('',(-1.0,0.0,0.0));
#110=AXIS2_PLACEMENT_3D('',#107,#108,#109);
#111=PLANE('',#110);
#112=CARTESIAN_POINT('',(29.362500000000004,0.0,12.5));
#113=VERTEX_POINT('',#112);
#114=CARTESIAN_POINT('',(0.0,0.0,12.5));
#115=DIRECTION('',(0.0,0.0,-1.0));
#116=DIRECTION('',(-1.0,0.0,0.0));
#117=AXIS2_PLACEMENT_3D('',#114,#115,#116);
#118=CIRCLE('',#117,29.362500000000004);
#119=EDGE_CURVE('',#113,#113,#118,.T.);
#120=ORIENTED_EDGE('',*,*,#119,.F.);
#121=EDGE_LOOP('',(#120));
#122=FACE_OUTER_BOUND('',#121,.T.);
#123=CARTESIAN_POINT('',(29.162500000000001,0.0,12.5));
#124=VERTEX_POINT('',#123);
#125=CARTESIAN_POINT('',(0.0,0.0,12.5));
#126=DIRECTION('',(0.0,0.0,-1.0));
#127=DIRECTION('',(1.0,0.0,0.0));
#128=AXIS2_PLACEMENT_3D('',#125,#126,#127);
#129=CIRCLE('',#128,29.162500000000001);
#130=EDGE_CURVE('',#124,#124,#129,.T.);
#131=ORIENTED_EDGE('',*,*,#130,.T.);
#132=EDGE_LOOP('',(#131));
#133=FACE_BOUND('',#132,.T.);
#134=ADVANCED_FACE('',(#122,#133),#111,.F.);
#135=CARTESIAN_POINT('',(0.0,0.0,12.6));
#136=DIRECTION('',(0.0,0.0,-1.0));
#137=DIRECTION('',(1.0,0.0,0.0));
#138=AXIS2_PLACEMENT_3D('',#135,#136,#137);
#139=CYLINDRICAL_SURFACE('',#138,29.162500000000001);
#140=CARTESIAN_POINT('',(29.162500000000001,0.0,12.699999999999999));
#141=VERTEX_POINT('',#140);
#142=CARTESIAN_POINT('',(0.0,0.0,12.699999999999999));
#143=DIRECTION('',(0.0,0.0,-1.0));
#144=DIRECTION('',(1.0,0.0,0.0));
#145=AXIS2_PLACEMENT_3D('',#142,#143,#144);
#146=CIRCLE('',#145,29.162500000000001);
#147=EDGE_CURVE('',#141,#141,#146,.T.);
#148=ORIENTED_EDGE('',*,*,#147,.T.);
#149=EDGE_LOOP('',(#148));
#150=FACE_OUTER_BOUND('',#149,.T.);
#151=ORIENTED_EDGE('',*,*,#130,.F.);
#152=EDGE_LOOP('',(#151));
#153=FACE_BOUND('',#152,.T.);
#154=ADVANCED_FACE('',(#150,#153),#139,.T.);
#155=CARTESIAN_POINT('',(29.262500000000003,0.0,12.699999999999999));
#156=DIRECTION('',(0.0,0.0,1.0));
#157=DIRECTION('',(1.0,0.0,0.0));
#158=AXIS2_PLACEMENT_3D('',#155,#156,#157);
#159=PLANE('',#158);
#160=CARTESIAN_POINT('',(29.362500000000004,0.0,12.699999999999999));
#161=VERTEX_POINT('',#160);
#162=CARTESIAN_POINT('',(0.0,0.0,12.699999999999999));
#163=DIRECTION('',(0.0,0.0,1.0));
#164=DIRECTION('',(-1.0,0.0,0.0));
#165=AXIS2_PLACEMENT_3D('',#162,#163,#164);
#166=CIRCLE('',#165,29.362500000000004);
#167=EDGE_CURVE('',#161,#161,#166,.T.);
#168=ORIENTED_EDGE('',*,*,#167,.F.);
#169=EDGE_LOOP('',(#168));
#170=FACE_OUTER_BOUND('',#169,.T.);
#171=ORIENTED_EDGE('',*,*,#147,.F.);
#172=EDGE_LOOP('',(#171));
#173=FACE_BOUND('',#172,.T.);
#174=ADVANCED_FACE('',(#170,#173),#159,.F.);
#175=CARTESIAN_POINT('',(0.0,0.0,0.0));
#176=DIRECTION('',(0.0,0.0,1.0));
#177=DIRECTION('',(-1.0,0.0,0.0));
#178=AXIS2_PLACEMENT_3D('',#175,#176,#177);
#179=CYLINDRICAL_SURFACE('',#178,29.362500000000004);
#180=CARTESIAN_POINT('',(29.362500000000004,3.595869E-015,19.050000000000004));
#181=VERTEX_POINT('',#180);
#182=CARTESIAN_POINT('',(0.0,0.0,19.050000000000004));
#183=DIRECTION('',(0.0,0.0,-1.0));
#184=DIRECTION('',(-1.0,0.0,0.0));
#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);
#186=CIRCLE('',#185,29.362500000000004);
#187=EDGE_CURVE('',#181,#181,#186,.T.);
#188=ORIENTED_EDGE('',*,*,#187,.T.);
#189=EDGE_LOOP('',(#188));
#190=FACE_OUTER_BOUND('',#189,.T.);
#191=ORIENTED_EDGE('',*,*,#167,.T.);
#192=EDGE_LOOP('',(#191));
#193=FACE_BOUND('',#192,.T.);
#194=ADVANCED_FACE('',(#190,#193),#179,.T.);
#195=CARTESIAN_POINT('',(7.149052E-030,0.0,9.800000000000001));
#196=DIRECTION('',(2.465190E-030,0.0,1.0));
#197=DIRECTION('',(1.0,0.0,0.0));
#198=AXIS2_PLACEMENT_3D('',#195,#196,#197);
#199=CONICAL_SURFACE('',#198,18.877052658050253,60.000000000000007);
#200=CARTESIAN_POINT('',(13.854105316100512,0.0,6.900000000000002));
#201=VERTEX_POINT('',#200);
#202=CARTESIAN_POINT('',(0.0,0.0,6.900000000000002));
#203=DIRECTION('',(0.0,0.0,1.0));
#204=DIRECTION('',(1.0,0.0,0.0));
#205=AXIS2_PLACEMENT_3D('',#202,#203,#204);
#206=CIRCLE('',#205,13.854105316100512);
#207=EDGE_CURVE('',#201,#201,#206,.T.);
#208=ORIENTED_EDGE('',*,*,#207,.F.);
#209=EDGE_LOOP('',(#208));
#210=FACE_OUTER_BOUND('',#209,.T.);
#211=CARTESIAN_POINT('',(-23.900000000000002,0.0,12.699999999999999));
#212=VERTEX_POINT('',#211);
#213=CARTESIAN_POINT('',(0.0,0.0,12.699999999999999));
#214=DIRECTION('',(0.0,0.0,-1.0));
#215=DIRECTION('',(-1.0,0.0,0.0));
#216=AXIS2_PLACEMENT_3D('',#213,#214,#215);
#217=CIRCLE('',#216,23.900000000000002);
#218=EDGE_CURVE('',#212,#212,#217,.T.);
#219=ORIENTED_EDGE('',*,*,#218,.F.);
#220=EDGE_LOOP('',(#219));
#221=FACE_BOUND('',#220,.T.);
#222=ADVANCED_FACE('',(#210,#221),#199,.F.);
#223=CARTESIAN_POINT('',(6.927052658050256,0.0,6.900000000000002));
#224=DIRECTION('',(0.0,0.0,1.0));
#225=DIRECTION('',(1.0,0.0,0.0));
#226=AXIS2_PLACEMENT_3D('',#223,#224,#225);
#227=PLANE('',#226);
#228=ORIENTED_EDGE('',*,*,#207,.T.);
#229=EDGE_LOOP('',(#228));
#230=FACE_OUTER_BOUND('',#229,.T.);
#231=ADVANCED_FACE('',(#230),#227,.T.);
#232=CARTESIAN_POINT('',(6.953847577293367,0.0,6.699999999999999));
#233=DIRECTION('',(0.0,0.0,-1.0));
#234=DIRECTION('',(-1.0,0.0,0.0));
#235=AXIS2_PLACEMENT_3D('',#232,#233,#234);
#236=PLANE('',#235);
#237=CARTESIAN_POINT('',(13.907695154586733,0.0,6.699999999999998));
#238=VERTEX_POINT('',#237);
#239=CARTESIAN_POINT('',(-4.930381E-031,0.0,6.699999999999998));
#240=DIRECTION('',(0.0,0.0,1.0));
#241=DIRECTION('',(1.0,0.0,0.0));
#242=AXIS2_PLACEMENT_3D('',#239,#240,#241);
#243=CIRCLE('',#242,13.907695154586733);
#244=EDGE_CURVE('',#238,#238,#243,.T.);
#245=ORIENTED_EDGE('',*,*,#244,.F.);
#246=EDGE_LOOP('',(#245));
#247=FACE_OUTER_BOUND('',#246,.T.);
#248=ADVANCED_FACE('',(#247),#236,.T.);
#249=CARTESIAN_POINT('',(6.617877E-030,0.0,9.584529946162071));
#250=DIRECTION('',(2.465190E-030,0.0,1.0));
#251=DIRECTION('',(1.0,0.0,0.0));
#252=AXIS2_PLACEMENT_3D('',#249,#250,#251);
#253=CONICAL_SURFACE('',#252,18.903847577293366,60.000000000000021);
#254=CARTESIAN_POINT('',(23.900000000000002,0.0,12.469059892324147));
#255=VERTEX_POINT('',#254);
#256=CARTESIAN_POINT('',(0.0,0.0,12.469059892324147));
#257=DIRECTION('',(0.0,0.0,1.0));
#258=DIRECTION('',(-1.0,0.0,0.0));
#259=AXIS2_PLACEMENT_3D('',#256,#257,#258);
#260=CIRCLE('',#259,23.900000000000002);
#261=EDGE_CURVE('',#255,#255,#260,.T.);
#262=ORIENTED_EDGE('',*,*,#261,.F.);
#263=EDGE_LOOP('',(#262));
#264=FACE_OUTER_BOUND('',#263,.T.);
#265=ORIENTED_EDGE('',*,*,#244,.T.);
#266=EDGE_LOOP('',(#265));
#267=FACE_BOUND('',#266,.T.);
#268=ADVANCED_FACE('',(#264,#267),#253,.T.);
#269=CARTESIAN_POINT('',(0.0,0.0,12.699999999999999));
#270=DIRECTION('',(0.0,0.0,-1.0));
#271=DIRECTION('',(-1.0,0.0,0.0));
#272=AXIS2_PLACEMENT_3D('',#269,#270,#271);
#273=PLANE('',#272);
#274=ORIENTED_EDGE('',*,*,#218,.T.);
#275=EDGE_LOOP('',(#274));
#276=FACE_OUTER_BOUND('',#275,.T.);
#277=CARTESIAN_POINT('',(21.655000000000001,-2.651973E-015,12.699999999999996));
#278=VERTEX_POINT('',#277);
#279=CARTESIAN_POINT('',(0.0,0.0,12.699999999999996));
#280=DIRECTION('',(0.0,0.0,-1.0));
#281=DIRECTION('',(-1.0,0.0,0.0));
#282=AXIS2_PLACEMENT_3D('',#279,#280,#281);
#283=CIRCLE('',#282,21.655000000000001);
#284=EDGE_CURVE('',#278,#278,#283,.T.);
#285=ORIENTED_EDGE('',*,*,#284,.F.);
#286=EDGE_LOOP('',(#285));
#287=FACE_BOUND('',#286,.T.);
#288=ADVANCED_FACE('',(#276,#287),#273,.T.);
#289=CARTESIAN_POINT('',(0.0,0.0,6.35));
#290=DIRECTION('',(0.0,0.0,-1.0));
#291=DIRECTION('',(-1.0,0.0,0.0));
#292=AXIS2_PLACEMENT_3D('',#289,#290,#291);
#293=CYLINDRICAL_SURFACE('',#292,23.900000000000002);
#294=ORIENTED_EDGE('',*,*,#261,.T.);
#295=EDGE_LOOP('',(#294));
#296=FACE_OUTER_BOUND('',#295,.T.);
#297=CARTESIAN_POINT('',(-23.900000000000002,0.0,0.0));
#298=VERTEX_POINT('',#297);
#299=CARTESIAN_POINT('',(0.0,0.0,0.0));
#300=DIRECTION('',(0.0,0.0,1.0));
#301=DIRECTION('',(-1.0,0.0,0.0));
#302=AXIS2_PLACEMENT_3D('',#299,#300,#301);
#303=CIRCLE('',#302,23.900000000000002);
#304=EDGE_CURVE('',#298,#298,#303,.T.);
#305=ORIENTED_EDGE('',*,*,#304,.F.);
#306=EDGE_LOOP('',(#305));
#307=FACE_BOUND('',#306,.T.);
#308=ADVANCED_FACE('',(#296,#307),#293,.F.);
#309=CARTESIAN_POINT('',(0.0,0.0,85.206535840861406));
#310=DIRECTION('',(0.0,0.0,-1.0));
#311=DIRECTION('',(-1.0,0.0,0.0));
#312=AXIS2_PLACEMENT_3D('',#309,#310,#311);
#313=CYLINDRICAL_SURFACE('',#312,21.655000000000001);
#314=CARTESIAN_POINT('',(21.655000000000001,-2.651973E-015,19.050000000000004));
#315=VERTEX_POINT('',#314);
#316=CARTESIAN_POINT('',(0.0,0.0,19.050000000000004));
#317=DIRECTION('',(0.0,0.0,-1.0));
#318=DIRECTION('',(-1.0,0.0,0.0));
#319=AXIS2_PLACEMENT_3D('',#316,#317,#318);
#320=CIRCLE('',#319,21.655000000000001);
#321=EDGE_CURVE('',#315,#315,#320,.T.);
#322=ORIENTED_EDGE('',*,*,#321,.F.);
#323=EDGE_LOOP('',(#322));
#324=FACE_OUTER_BOUND('',#323,.T.);
#325=ORIENTED_EDGE('',*,*,#284,.T.);
#326=EDGE_LOOP('',(#325));
#327=FACE_BOUND('',#326,.T.);
#328=ADVANCED_FACE('',(#324,#327),#313,.F.);
#329=CARTESIAN_POINT('',(0.0,0.0,0.0));
#330=DIRECTION('',(0.0,0.0,1.0));
#331=DIRECTION('',(-1.0,0.0,0.0));
#332=AXIS2_PLACEMENT_3D('',#329,#330,#331);
#333=CYLINDRICAL_SURFACE('',#332,29.362500000000004);
#334=ORIENTED_EDGE('',*,*,#119,.T.);
#335=EDGE_LOOP('',(#334));
#336=FACE_OUTER_BOUND('',#335,.T.);
#337=CARTESIAN_POINT('',(29.362500000000004,3.595869E-015,0.0));
#338=VERTEX_POINT('',#337);
#339=CARTESIAN_POINT('',(0.0,0.0,0.0));
#340=DIRECTION('',(0.0,0.0,-1.0));
#341=DIRECTION('',(-1.0,0.0,0.0));
#342=AXIS2_PLACEMENT_3D('',#339,#340,#341);
#343=CIRCLE('',#342,29.362500000000004);
#344=EDGE_CURVE('',#338,#338,#343,.T.);
#345=ORIENTED_EDGE('',*,*,#344,.F.);
#346=EDGE_LOOP('',(#345));
#347=FACE_BOUND('',#346,.T.);
#348=ADVANCED_FACE('',(#336,#347),#333,.T.);
#349=CARTESIAN_POINT('',(0.0,0.0,19.050000000000004));
#350=DIRECTION('',(0.0,0.0,-1.0));
#351=DIRECTION('',(-1.0,0.0,0.0));
#352=AXIS2_PLACEMENT_3D('',#349,#350,#351);
#353=PLANE('',#352);
#354=ORIENTED_EDGE('',*,*,#187,.F.);
#355=EDGE_LOOP('',(#354));
#356=FACE_OUTER_BOUND('',#355,.T.);
#357=ORIENTED_EDGE('',*,*,#321,.T.);
#358=EDGE_LOOP('',(#357));
#359=FACE_BOUND('',#358,.T.);
#360=ADVANCED_FACE('',(#356,#359),#353,.F.);
#361=CARTESIAN_POINT('',(0.0,0.0,0.0));
#362=DIRECTION('',(0.0,0.0,-1.0));
#363=DIRECTION('',(-1.0,0.0,0.0));
#364=AXIS2_PLACEMENT_3D('',#361,#362,#363);
#365=PLANE('',#364);
#366=ORIENTED_EDGE('',*,*,#344,.T.);
#367=EDGE_LOOP('',(#366));
#368=FACE_OUTER_BOUND('',#367,.T.);
#369=ORIENTED_EDGE('',*,*,#304,.T.);
#370=EDGE_LOOP('',(#369));
#371=FACE_BOUND('',#370,.T.);
#372=ADVANCED_FACE('',(#368,#371),#365,.T.);
#373=CLOSED_SHELL('',(#134,#154,#174,#194,#222,#231,#248,#268,#288,#308,#328,#348,#360,#372));
#374=MANIFOLD_SOLID_BREP('Solid1',#373);
#375=COLOUR_RGB('Blue (Clear)',0.003921569790691,0.211765006184578,0.819607973098755);
#376=FILL_AREA_STYLE_COLOUR('Blue (Clear)',#375);
#377=FILL_AREA_STYLE('Blue (Clear)',(#376));
#378=SURFACE_STYLE_FILL_AREA(#377);
#379=SURFACE_SIDE_STYLE('Blue (Clear)',(#378));
#380=SURFACE_STYLE_USAGE(.BOTH.,#379);
#381=PRESENTATION_STYLE_ASSIGNMENT((#380));
#382=STYLED_ITEM('',(#381),#374);
#383=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#382,#874,#1161,#1328),#36);
#384=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#374),#75);
#385=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#384,#80);
#386=AXIS2_PLACEMENT_3D('',#387,#388,#389);
#387=CARTESIAN_POINT('',(0.049999999999998,6.123234E-018,13.299999999999992));
#388=DIRECTION('',(0.0,0.0,1.0));
#389=DIRECTION('',(1.0,0.0,0.0));
#390=NEXT_ASSEMBLY_USAGE_OCCURRENCE('X_F_PRES_BURST_DISK_1','X_F_PRES_BURST_DISK_1','X_F_PRES_BURST_DISK_1',#12,#51,'X_F_PRES_BURST_DISK_1');
#391=PRODUCT_DEFINITION_SHAPE('X_F_PRES_BURST_DISK_1','X_F_PRES_BURST_DISK_1',#390);
#392=ITEM_DEFINED_TRANSFORMATION('X_F_PRES_BURST_DISK_1','X_F_PRES_BURST_DISK_1',#76,#386);
#396=(REPRESENTATION_RELATIONSHIP('X_F_PRES_BURST_DISK_1','X_F_PRES_BURST_DISK_1',#80,#41)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#392)SHAPE_REPRESENTATION_RELATIONSHIP());
#397=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#396,#391);
#398=APPLICATION_CONTEXT('automotive design');
#399=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#398);
#400=PRODUCT_CONTEXT('',#398,'mechanical');
#401=PRODUCT('411-CF16-19','411-CF16-19',$,(#400));
#402=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#401));
#403=PRODUCT_DEFINITION_FORMATION('',$,#401);
#404=PRODUCT_DEFINITION_CONTEXT('part definition',#398,'design');
#405=PRODUCT_DEFINITION('',$,#403,#404);
#411=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#412=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#413=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#411);
#417=(CONVERSION_BASED_UNIT('DEGREE',#413)NAMED_UNIT(#412)PLANE_ANGLE_UNIT());
#421=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#425=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#427=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#425,'DISTANCE_ACCURACY_VALUE','');
#429=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#427))GLOBAL_UNIT_ASSIGNED_CONTEXT((#417,#421,#425))REPRESENTATION_CONTEXT('None','None'));
#430=AXIS2_PLACEMENT_3D('',#431,#432,#433);
#431=CARTESIAN_POINT('',(0.0,0.0,0.0));
#432=DIRECTION('',(0.0,0.0,1.0));
#433=DIRECTION('',(1.0,0.0,0.0));
#434=SHAPE_REPRESENTATION('',(#430),#429);
#435=PRODUCT_DEFINITION_SHAPE('','',#405);
#436=SHAPE_DEFINITION_REPRESENTATION(#435,#434);
#442=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#443=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#444=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#442);
#448=(CONVERSION_BASED_UNIT('DEGREE',#444)NAMED_UNIT(#443)PLANE_ANGLE_UNIT());
#452=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#456=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#458=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#456,'DISTANCE_ACCURACY_VALUE','');
#460=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#458))GLOBAL_UNIT_ASSIGNED_CONTEXT((#448,#452,#456))REPRESENTATION_CONTEXT('','3D'));
#461=CARTESIAN_POINT('',(-6.750000000000005,11.69134295108992,0.549999999999997));
#462=DIRECTION('',(0.0,0.0,-1.0));
#463=DIRECTION('',(0.5,-0.866025403784438,0.0));
#464=AXIS2_PLACEMENT_3D('',#461,#462,#463);
#465=CYLINDRICAL_SURFACE('',#464,2.2);
#466=CARTESIAN_POINT('',(-7.850000000000006,13.596598839415686,-6.450000000000004));
#467=VERTEX_POINT('',#466);
#468=CARTESIAN_POINT('',(-6.750000000000005,11.69134295108992,-6.450000000000004));
#469=DIRECTION('',(0.0,0.0,1.0));
#470=DIRECTION('',(0.5,-0.866025403784438,0.0));
#471=AXIS2_PLACEMENT_3D('',#468,#469,#470);
#472=CIRCLE('',#471,2.2);
#473=EDGE_CURVE('',#467,#467,#472,.T.);
#474=ORIENTED_EDGE('',*,*,#473,.F.);
#475=EDGE_LOOP('',(#474));
#476=FACE_OUTER_BOUND('',#475,.T.);
#477=CARTESIAN_POINT('',(-7.850000000000006,13.596598839415686,0.549999999999997));
#478=VERTEX_POINT('',#477);
#479=CARTESIAN_POINT('',(-6.750000000000005,11.69134295108992,0.549999999999997));
#480=DIRECTION('',(0.0,0.0,-1.0));
#481=DIRECTION('',(0.5,-0.866025403784438,0.0));
#482=AXIS2_PLACEMENT_3D('',#479,#480,#481);
#483=CIRCLE('',#482,2.2);
#484=EDGE_CURVE('',#478,#478,#483,.T.);
#485=ORIENTED_EDGE('',*,*,#484,.F.);
#486=EDGE_LOOP('',(#485));
#487=FACE_BOUND('',#486,.T.);
#488=ADVANCED_FACE('',(#476,#487),#465,.F.);
#489=CARTESIAN_POINT('',(-13.5,-1.653273E-015,0.549999999999997));
#490=DIRECTION('',(0.0,0.0,-1.0));
#491=DIRECTION('',(1.0,0.0,0.0));
#492=AXIS2_PLACEMENT_3D('',#489,#490,#491);
#493=CYLINDRICAL_SURFACE('',#492,2.2);
#494=CARTESIAN_POINT('',(-15.700000000000001,-2.192109E-015,-6.450000000000004));
#495=VERTEX_POINT('',#494);
#496=CARTESIAN_POINT('',(-13.5,-1.653273E-015,-6.450000000000004));
#497=DIRECTION('',(0.0,0.0,1.0));
#498=DIRECTION('',(1.0,0.0,0.0));
#499=AXIS2_PLACEMENT_3D('',#496,#497,#498);
#500=CIRCLE('',#499,2.2);
#501=EDGE_CURVE('',#495,#495,#500,.T.);
#502=ORIENTED_EDGE('',*,*,#501,.F.);
#503=EDGE_LOOP('',(#502));
#504=FACE_OUTER_BOUND('',#503,.T.);
#505=CARTESIAN_POINT('',(-15.700000000000001,-2.192118E-015,0.549999999999997));
#506=VERTEX_POINT('',#505);
#507=CARTESIAN_POINT('',(-13.5,-1.653273E-015,0.549999999999997));
#508=DIRECTION('',(0.0,0.0,-1.0));
#509=DIRECTION('',(1.0,0.0,0.0));
#510=AXIS2_PLACEMENT_3D('',#507,#508,#509);
#511=CIRCLE('',#510,2.2);
#512=EDGE_CURVE('',#506,#506,#511,.T.);
#513=ORIENTED_EDGE('',*,*,#512,.F.);
#514=EDGE_LOOP('',(#513));
#515=FACE_BOUND('',#514,.T.);
#516=ADVANCED_FACE('',(#504,#515),#493,.F.);
#517=CARTESIAN_POINT('',(-6.749999999999997,-11.691342951089926,0.549999999999997));
#518=DIRECTION('',(0.0,0.0,-1.0));
#519=DIRECTION('',(0.5,0.866025403784439,0.0));
#520=AXIS2_PLACEMENT_3D('',#517,#518,#519);
#521=CYLINDRICAL_SURFACE('',#520,2.2);
#522=CARTESIAN_POINT('',(-7.849999999999997,-13.596598839415691,-6.450000000000004));
#523=VERTEX_POINT('',#522);
#524=CARTESIAN_POINT('',(-6.749999999999997,-11.691342951089926,-6.450000000000004));
#525=DIRECTION('',(0.0,0.0,1.0));
#526=DIRECTION('',(0.5,0.866025403784439,0.0));
#527=AXIS2_PLACEMENT_3D('',#524,#525,#526);
#528=CIRCLE('',#527,2.2);
#529=EDGE_CURVE('',#523,#523,#528,.T.);
#530=ORIENTED_EDGE('',*,*,#529,.F.);
#531=EDGE_LOOP('',(#530));
#532=FACE_OUTER_BOUND('',#531,.T.);
#533=CARTESIAN_POINT('',(-7.849999999999997,-13.596598839415691,0.549999999999997));
#534=VERTEX_POINT('',#533);
#535=CARTESIAN_POINT('',(-6.749999999999997,-11.691342951089926,0.549999999999997));
#536=DIRECTION('',(0.0,0.0,-1.0));
#537=DIRECTION('',(0.5,0.866025403784439,0.0));
#538=AXIS2_PLACEMENT_3D('',#535,#536,#537);
#539=CIRCLE('',#538,2.2);
#540=EDGE_CURVE('',#534,#534,#539,.T.);
#541=ORIENTED_EDGE('',*,*,#540,.F.);
#542=EDGE_LOOP('',(#541));
#543=FACE_BOUND('',#542,.T.);
#544=ADVANCED_FACE('',(#532,#543),#521,.F.);
#545=CARTESIAN_POINT('',(6.750000000000002,-11.691342951089922,0.549999999999997));
#546=DIRECTION('',(0.0,0.0,-1.0));
#547=DIRECTION('',(-0.5,0.866025403784438,0.0));
#548=AXIS2_PLACEMENT_3D('',#545,#546,#547);
#549=CYLINDRICAL_SURFACE('',#548,2.2);
#550=CARTESIAN_POINT('',(7.850000000000002,-13.596598839415686,-6.450000000000004));
#551=VERTEX_POINT('',#550);
#552=CARTESIAN_POINT('',(6.750000000000002,-11.691342951089922,-6.450000000000004));
#553=DIRECTION('',(0.0,0.0,1.0));
#554=DIRECTION('',(-0.5,0.866025403784438,0.0));
#555=AXIS2_PLACEMENT_3D('',#552,#553,#554);
#556=CIRCLE('',#555,2.2);
#557=EDGE_CURVE('',#551,#551,#556,.T.);
#558=ORIENTED_EDGE('',*,*,#557,.F.);
#559=EDGE_LOOP('',(#558));
#560=FACE_OUTER_BOUND('',#559,.T.);
#561=CARTESIAN_POINT('',(7.850000000000002,-13.596598839415686,0.549999999999997));
#562=VERTEX_POINT('',#561);
#563=CARTESIAN_POINT('',(6.750000000000002,-11.691342951089922,0.549999999999997));
#564=DIRECTION('',(0.0,0.0,-1.0));
#565=DIRECTION('',(-0.5,0.866025403784438,0.0));
#566=AXIS2_PLACEMENT_3D('',#563,#564,#565);
#567=CIRCLE('',#566,2.2);
#568=EDGE_CURVE('',#562,#562,#567,.T.);
#569=ORIENTED_EDGE('',*,*,#568,.F.);
#570=EDGE_LOOP('',(#569));
#571=FACE_BOUND('',#570,.T.);
#572=ADVANCED_FACE('',(#560,#571),#549,.F.);
#573=CARTESIAN_POINT('',(6.749999999999991,11.691342951089927,0.549999999999997));
#574=DIRECTION('',(0.0,0.0,-1.0));
#575=DIRECTION('',(-0.499999999999999,-0.866025403784439,0.0));
#576=AXIS2_PLACEMENT_3D('',#573,#574,#575);
#577=CYLINDRICAL_SURFACE('',#576,2.2);
#578=CARTESIAN_POINT('',(7.849999999999991,13.596598839415694,-6.450000000000004));
#579=VERTEX_POINT('',#578);
#580=CARTESIAN_POINT('',(6.749999999999991,11.691342951089927,-6.450000000000004));
#581=DIRECTION('',(0.0,0.0,1.0));
#582=DIRECTION('',(-0.499999999999999,-0.866025403784439,0.0));
#583=AXIS2_PLACEMENT_3D('',#580,#581,#582);
#584=CIRCLE('',#583,2.199999999999999);
#585=EDGE_CURVE('',#579,#579,#584,.T.);
#586=ORIENTED_EDGE('',*,*,#585,.F.);
#587=EDGE_LOOP('',(#586));
#588=FACE_OUTER_BOUND('',#587,.T.);
#589=CARTESIAN_POINT('',(7.849999999999991,13.596598839415694,0.549999999999997));
#590=VERTEX_POINT('',#589);
#591=CARTESIAN_POINT('',(6.749999999999991,11.691342951089927,0.549999999999997));
#592=DIRECTION('',(0.0,0.0,-1.0));
#593=DIRECTION('',(-0.499999999999999,-0.866025403784439,0.0));
#594=AXIS2_PLACEMENT_3D('',#591,#592,#593);
#595=CIRCLE('',#594,2.199999999999999);
#596=EDGE_CURVE('',#590,#590,#595,.T.);
#597=ORIENTED_EDGE('',*,*,#596,.F.);
#598=EDGE_LOOP('',(#597));
#599=FACE_BOUND('',#598,.T.);
#600=ADVANCED_FACE('',(#588,#599),#577,.F.);
#601=CARTESIAN_POINT('',(0.0,0.0,-0.027977675699654));
#602=DIRECTION('',(0.0,0.0,-1.0));
#603=DIRECTION('',(1.0,0.0,0.0));
#604=AXIS2_PLACEMENT_3D('',#601,#602,#603);
#605=CYLINDRICAL_SURFACE('',#604,10.700000000000001);
#606=CARTESIAN_POINT('',(10.700000000000001,0.0,-0.605955351399305));
#607=VERTEX_POINT('',#606);
#608=CARTESIAN_POINT('',(0.0,0.0,-0.605955351399305));
#609=DIRECTION('',(0.0,0.0,-1.0));
#610=DIRECTION('',(1.0,0.0,0.0));
#611=AXIS2_PLACEMENT_3D('',#608,#609,#610);
#612=CIRCLE('',#611,10.700000000000001);
#613=EDGE_CURVE('',#607,#607,#612,.T.);
#614=ORIENTED_EDGE('',*,*,#613,.T.);
#615=EDGE_LOOP('',(#614));
#616=FACE_OUTER_BOUND('',#615,.T.);
#617=CARTESIAN_POINT('',(10.700000000000001,0.0,0.549999999999997));
#618=VERTEX_POINT('',#617);
#619=CARTESIAN_POINT('',(0.0,0.0,0.549999999999997));
#620=DIRECTION('',(0.0,0.0,-1.0));
#621=DIRECTION('',(1.0,0.0,0.0));
#622=AXIS2_PLACEMENT_3D('',#619,#620,#621);
#623=CIRCLE('',#622,10.700000000000001);
#624=EDGE_CURVE('',#618,#618,#623,.T.);
#625=ORIENTED_EDGE('',*,*,#624,.F.);
#626=EDGE_LOOP('',(#625));
#627=FACE_BOUND('',#626,.T.);
#628=ADVANCED_FACE('',(#616,#627),#605,.F.);
#629=CARTESIAN_POINT('',(0.0,0.0,-0.332977675699654));
#630=DIRECTION('',(0.0,0.0,-1.0));
#631=DIRECTION('',(1.0,0.0,0.0));
#632=AXIS2_PLACEMENT_3D('',#629,#630,#631);
#633=CONICAL_SURFACE('',#632,9.950000000000001,70.000000000000043);
#634=CARTESIAN_POINT('',(9.200000000000001,0.0,-0.060000000000003));
#635=VERTEX_POINT('',#634);
#636=CARTESIAN_POINT('',(0.0,0.0,-0.060000000000003));
#637=DIRECTION('',(0.0,0.0,-1.0));
#638=DIRECTION('',(1.0,0.0,0.0));
#639=AXIS2_PLACEMENT_3D('',#636,#637,#638);
#640=CIRCLE('',#639,9.200000000000001);
#641=EDGE_CURVE('',#635,#635,#640,.T.);
#642=ORIENTED_EDGE('',*,*,#641,.T.);
#643=EDGE_LOOP('',(#642));
#644=FACE_OUTER_BOUND('',#643,.T.);
#645=ORIENTED_EDGE('',*,*,#613,.F.);
#646=EDGE_LOOP('',(#645));
#647=FACE_BOUND('',#646,.T.);
#648=ADVANCED_FACE('',(#644,#647),#633,.T.);
#649=CARTESIAN_POINT('',(0.0,0.0,-0.355000000000002));
#650=DIRECTION('',(0.0,0.0,1.0));
#651=DIRECTION('',(1.0,0.0,0.0));
#652=AXIS2_PLACEMENT_3D('',#649,#650,#651);
#653=CONICAL_SURFACE('',#652,9.092628780891472,19.999999999999918);
#654=CARTESIAN_POINT('',(8.985257561782943,0.0,-0.650000000000002));
#655=VERTEX_POINT('',#654);
#656=CARTESIAN_POINT('',(0.0,0.0,-0.650000000000002));
#657=DIRECTION('',(0.0,0.0,-1.0));
#658=DIRECTION('',(1.0,0.0,0.0));
#659=AXIS2_PLACEMENT_3D('',#656,#657,#658);
#660=CIRCLE('',#659,8.985257561782943);
#661=EDGE_CURVE('',#655,#655,#660,.T.);
#662=ORIENTED_EDGE('',*,*,#661,.T.);
#663=EDGE_LOOP('',(#662));
#664=FACE_OUTER_BOUND('',#663,.T.);
#665=ORIENTED_EDGE('',*,*,#641,.F.);
#666=EDGE_LOOP('',(#665));
#667=FACE_BOUND('',#666,.T.);
#668=ADVANCED_FACE('',(#664,#667),#653,.F.);
#669=CARTESIAN_POINT('',(4.492628780891471,0.0,-0.650000000000003));
#670=DIRECTION('',(0.0,0.0,-1.0));
#671=DIRECTION('',(-1.0,0.0,0.0));
#672=AXIS2_PLACEMENT_3D('',#669,#670,#671);
#673=PLANE('',#672);
#674=ORIENTED_EDGE('',*,*,#661,.F.);
#675=EDGE_LOOP('',(#674));
#676=FACE_OUTER_BOUND('',#675,.T.);
#677=CARTESIAN_POINT('',(8.550000000000001,1.047038E-015,-0.650000000000004));
#678=VERTEX_POINT('',#677);
#679=CARTESIAN_POINT('',(0.0,0.0,-0.650000000000004));
#680=DIRECTION('',(0.0,0.0,1.0));
#681=DIRECTION('',(-1.0,0.0,0.0));
#682=AXIS2_PLACEMENT_3D('',#679,#680,#681);
#683=CIRCLE('',#682,8.550000000000001);
#684=EDGE_CURVE('',#678,#678,#683,.T.);
#685=ORIENTED_EDGE('',*,*,#684,.F.);
#686=EDGE_LOOP('',(#685));
#687=FACE_BOUND('',#686,.T.);
#688=ADVANCED_FACE('',(#676,#687),#673,.F.);
#689=CARTESIAN_POINT('',(13.5,0.0,0.549999999999997));
#690=DIRECTION('',(0.0,0.0,-1.0));
#691=DIRECTION('',(-1.0,0.0,0.0));
#692=AXIS2_PLACEMENT_3D('',#689,#690,#691);
#693=CYLINDRICAL_SURFACE('',#692,2.2);
#694=CARTESIAN_POINT('',(15.700000000000001,2.694134E-016,-6.450000000000004));
#695=VERTEX_POINT('',#694);
#696=CARTESIAN_POINT('',(13.5,0.0,-6.450000000000004));
#697=DIRECTION('',(0.0,0.0,1.0));
#698=DIRECTION('',(-1.0,0.0,0.0));
#699=AXIS2_PLACEMENT_3D('',#696,#697,#698);
#700=CIRCLE('',#699,2.2);
#701=EDGE_CURVE('',#695,#695,#700,.T.);
#702=ORIENTED_EDGE('',*,*,#701,.F.);
#703=EDGE_LOOP('',(#702));
#704=FACE_OUTER_BOUND('',#703,.T.);
#705=CARTESIAN_POINT('',(15.700000000000001,2.694223E-016,0.549999999999997));
#706=VERTEX_POINT('',#705);
#707=CARTESIAN_POINT('',(13.5,0.0,0.549999999999997));
#708=DIRECTION('',(0.0,0.0,-1.0));
#709=DIRECTION('',(-1.0,0.0,0.0));
#710=AXIS2_PLACEMENT_3D('',#707,#708,#709);
#711=CIRCLE('',#710,2.2);
#712=EDGE_CURVE('',#706,#706,#711,.T.);
#713=ORIENTED_EDGE('',*,*,#712,.F.);
#714=EDGE_LOOP('',(#713));
#715=FACE_BOUND('',#714,.T.);
#716=ADVANCED_FACE('',(#704,#715),#693,.F.);
#717=CARTESIAN_POINT('',(0.0,0.0,-2.750000000000003));
#718=DIRECTION('',(0.0,0.0,-1.0));
#719=DIRECTION('',(-1.0,0.0,0.0));
#720=AXIS2_PLACEMENT_3D('',#717,#718,#719);
#721=PLANE('',#720);
#722=CARTESIAN_POINT('',(-9.550000000000001,0.0,-2.750000000000003));
#723=VERTEX_POINT('',#722);
#724=CARTESIAN_POINT('',(0.0,0.0,-2.750000000000003));
#725=DIRECTION('',(0.0,0.0,-1.0));
#726=DIRECTION('',(-1.0,0.0,0.0));
#727=AXIS2_PLACEMENT_3D('',#724,#725,#726);
#728=CIRCLE('',#727,9.550000000000001);
#729=EDGE_CURVE('',#723,#723,#728,.T.);
#730=ORIENTED_EDGE('',*,*,#729,.T.);
#731=EDGE_LOOP('',(#730));
#732=FACE_OUTER_BOUND('',#731,.T.);
#733=CARTESIAN_POINT('',(8.550000000000001,-1.047038E-015,-2.750000000000003));
#734=VERTEX_POINT('',#733);
#735=CARTESIAN_POINT('',(0.0,0.0,-2.750000000000003));
#736=DIRECTION('',(0.0,0.0,-1.0));
#737=DIRECTION('',(-1.0,0.0,0.0));
#738=AXIS2_PLACEMENT_3D('',#735,#736,#737);
#739=CIRCLE('',#738,8.550000000000001);
#740=EDGE_CURVE('',#734,#734,#739,.T.);
#741=ORIENTED_EDGE('',*,*,#740,.F.);
#742=EDGE_LOOP('',(#741));
#743=FACE_BOUND('',#742,.T.);
#744=ADVANCED_FACE('',(#732,#743),#721,.T.);
#745=CARTESIAN_POINT('',(0.0,0.0,-4.600000000000003));
#746=DIRECTION('',(0.0,0.0,-1.0));
#747=DIRECTION('',(-1.0,0.0,0.0));
#748=AXIS2_PLACEMENT_3D('',#745,#746,#747);
#749=CYLINDRICAL_SURFACE('',#748,9.550000000000001);
#750=CARTESIAN_POINT('',(-9.550000000000001,0.0,-6.450000000000004));
#751=VERTEX_POINT('',#750);
#752=CARTESIAN_POINT('',(0.0,0.0,-6.450000000000004));
#753=DIRECTION('',(0.0,0.0,1.0));
#754=DIRECTION('',(-1.0,0.0,0.0));
#755=AXIS2_PLACEMENT_3D('',#752,#753,#754);
#756=CIRCLE('',#755,9.550000000000001);
#757=EDGE_CURVE('',#751,#751,#756,.T.);
#758=ORIENTED_EDGE('',*,*,#757,.F.);
#759=EDGE_LOOP('',(#758));
#760=FACE_OUTER_BOUND('',#759,.T.);
#761=ORIENTED_EDGE('',*,*,#729,.F.);
#762=EDGE_LOOP('',(#761));
#763=FACE_BOUND('',#762,.T.);
#764=ADVANCED_FACE('',(#760,#763),#749,.F.);
#765=CARTESIAN_POINT('',(0.0,0.0,41.86024736016158));
#766=DIRECTION('',(0.0,0.0,-1.0));
#767=DIRECTION('',(-1.0,0.0,0.0));
#768=AXIS2_PLACEMENT_3D('',#765,#766,#767);
#769=CYLINDRICAL_SURFACE('',#768,8.550000000000001);
#770=ORIENTED_EDGE('',*,*,#684,.T.);
#771=EDGE_LOOP('',(#770));
#772=FACE_OUTER_BOUND('',#771,.T.);
#773=ORIENTED_EDGE('',*,*,#740,.T.);
#774=EDGE_LOOP('',(#773));
#775=FACE_BOUND('',#774,.T.);
#776=ADVANCED_FACE('',(#772,#775),#769,.F.);
#777=CARTESIAN_POINT('',(0.0,0.0,-6.450000000000004));
#778=DIRECTION('',(0.0,0.0,1.0));
#779=DIRECTION('',(-1.0,0.0,0.0));
#780=AXIS2_PLACEMENT_3D('',#777,#778,#779);
#781=CYLINDRICAL_SURFACE('',#780,16.899999999999999);
#782=CARTESIAN_POINT('',(16.899999999999999,2.069653E-015,0.549999999999997));
#783=VERTEX_POINT('',#782);
#784=CARTESIAN_POINT('',(0.0,0.0,0.549999999999997));
#785=DIRECTION('',(0.0,0.0,-1.0));
#786=DIRECTION('',(-1.0,0.0,0.0));
#787=AXIS2_PLACEMENT_3D('',#784,#785,#786);
#788=CIRCLE('',#787,16.899999999999999);
#789=EDGE_CURVE('',#783,#783,#788,.T.);
#790=ORIENTED_EDGE('',*,*,#789,.T.);
#791=EDGE_LOOP('',(#790));
#792=FACE_OUTER_BOUND('',#791,.T.);
#793=CARTESIAN_POINT('',(16.899999999999999,2.069653E-015,-6.450000000000004));
#794=VERTEX_POINT('',#793);
#795=CARTESIAN_POINT('',(0.0,0.0,-6.450000000000004));
#796=DIRECTION('',(0.0,0.0,-1.0));
#797=DIRECTION('',(-1.0,0.0,0.0));
#798=AXIS2_PLACEMENT_3D('',#795,#796,#797);
#799=CIRCLE('',#798,16.899999999999999);
#800=EDGE_CURVE('',#794,#794,#799,.T.);
#801=ORIENTED_EDGE('',*,*,#800,.F.);
#802=EDGE_LOOP('',(#801));
#803=FACE_BOUND('',#802,.T.);
#804=ADVANCED_FACE('',(#792,#803),#781,.T.);
#805=CARTESIAN_POINT('',(0.0,0.0,0.549999999999997));
#806=DIRECTION('',(0.0,0.0,-1.0));
#807=DIRECTION('',(-1.0,0.0,0.0));
#808=AXIS2_PLACEMENT_3D('',#805,#806,#807);
#809=PLANE('',#808);
#810=ORIENTED_EDGE('',*,*,#789,.F.);
#811=EDGE_LOOP('',(#810));
#812=FACE_OUTER_BOUND('',#811,.T.);
#813=ORIENTED_EDGE('',*,*,#484,.T.);
#814=EDGE_LOOP('',(#813));
#815=FACE_BOUND('',#814,.T.);
#816=ORIENTED_EDGE('',*,*,#512,.T.);
#817=EDGE_LOOP('',(#816));
#818=FACE_BOUND('',#817,.T.);
#819=ORIENTED_EDGE('',*,*,#540,.T.);
#820=EDGE_LOOP('',(#819));
#821=FACE_BOUND('',#820,.T.);
#822=ORIENTED_EDGE('',*,*,#568,.T.);
#823=EDGE_LOOP('',(#822));
#824=FACE_BOUND('',#823,.T.);
#825=ORIENTED_EDGE('',*,*,#596,.T.);
#826=EDGE_LOOP('',(#825));
#827=FACE_BOUND('',#826,.T.);
#828=ORIENTED_EDGE('',*,*,#624,.T.);
#829=EDGE_LOOP('',(#828));
#830=FACE_BOUND('',#829,.T.);
#831=ORIENTED_EDGE('',*,*,#712,.T.);
#832=EDGE_LOOP('',(#831));
#833=FACE_BOUND('',#832,.T.);
#834=ADVANCED_FACE('',(#812,#815,#818,#821,#824,#827,#830,#833),#809,.F.);
#835=CARTESIAN_POINT('',(0.0,0.0,-6.450000000000004));
#836=DIRECTION('',(0.0,0.0,-1.0));
#837=DIRECTION('',(-1.0,0.0,0.0));
#838=AXIS2_PLACEMENT_3D('',#835,#836,#837);
#839=PLANE('',#838);
#840=ORIENTED_EDGE('',*,*,#800,.T.);
#841=EDGE_LOOP('',(#840));
#842=FACE_OUTER_BOUND('',#841,.T.);
#843=ORIENTED_EDGE('',*,*,#473,.T.);
#844=EDGE_LOOP('',(#843));
#845=FACE_BOUND('',#844,.T.);
#846=ORIENTED_EDGE('',*,*,#501,.T.);
#847=EDGE_LOOP('',(#846));
#848=FACE_BOUND('',#847,.T.);
#849=ORIENTED_EDGE('',*,*,#529,.T.);
#850=EDGE_LOOP('',(#849));
#851=FACE_BOUND('',#850,.T.);
#852=ORIENTED_EDGE('',*,*,#557,.T.);
#853=EDGE_LOOP('',(#852));
#854=FACE_BOUND('',#853,.T.);
#855=ORIENTED_EDGE('',*,*,#585,.T.);
#856=EDGE_LOOP('',(#855));
#857=FACE_BOUND('',#856,.T.);
#858=ORIENTED_EDGE('',*,*,#701,.T.);
#859=EDGE_LOOP('',(#858));
#860=FACE_BOUND('',#859,.T.);
#861=ORIENTED_EDGE('',*,*,#757,.T.);
#862=EDGE_LOOP('',(#861));
#863=FACE_BOUND('',#862,.T.);
#864=ADVANCED_FACE('',(#842,#845,#848,#851,#854,#857,#860,#863),#839,.T.);
#865=CLOSED_SHELL('',(#488,#516,#544,#572,#600,#628,#648,#668,#688,#716,#744,#764,#776,#804,#834,#864));
#866=MANIFOLD_SOLID_BREP('Solid1',#865);
#867=COLOUR_RGB('Beige (Light)',0.780391991138458,0.745097994804382,0.64705902338028);
#868=FILL_AREA_STYLE_COLOUR('Beige (Light)',#867);
#869=FILL_AREA_STYLE('Beige (Light)',(#868));
#870=SURFACE_STYLE_FILL_AREA(#869);
#871=SURFACE_SIDE_STYLE('Beige (Light)',(#870));
#872=SURFACE_STYLE_USAGE(.BOTH.,#871);
#873=PRESENTATION_STYLE_ASSIGNMENT((#872));
#874=STYLED_ITEM('',(#873),#866);
#875=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#866),#429);
#876=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#875,#434);
#877=AXIS2_PLACEMENT_3D('',#878,#879,#880);
#878=CARTESIAN_POINT('',(0.050000000000006,1.391183E-014,-27.09999999999998));
#879=DIRECTION('',(1.370523E-015,4.337377E-015,-0.999999999999995));
#880=DIRECTION('',(-0.999999999999994,2.498002E-015,1.485704E-016));
#881=NEXT_ASSEMBLY_USAGE_OCCURRENCE('411-CF16-19:1','411-CF16-19:1','411-CF16-19:1',#12,#405,'411-CF16-19:1');
#882=PRODUCT_DEFINITION_SHAPE('411-CF16-19:1','411-CF16-19:1',#881);
#883=ITEM_DEFINED_TRANSFORMATION('411-CF16-19:1','411-CF16-19:1',#430,#877);
#887=(REPRESENTATION_RELATIONSHIP('411-CF16-19:1','411-CF16-19:1',#434,#41)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#883)SHAPE_REPRESENTATION_RELATIONSHIP());
#888=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#887,#882);
#889=APPLICATION_CONTEXT('automotive design');
#890=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#889);
#891=PRODUCT_CONTEXT('',#889,'mechanical');
#892=PRODUCT('AL-731','AL-731',$,(#891));
#893=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#892));
#894=PRODUCT_DEFINITION_FORMATION('',$,#892);
#895=PRODUCT_DEFINITION_CONTEXT('part definition',#889,'design');
#896=PRODUCT_DEFINITION('',$,#894,#895);
#902=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#903=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#904=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#902);
#908=(CONVERSION_BASED_UNIT('DEGREE',#904)NAMED_UNIT(#903)PLANE_ANGLE_UNIT());
#912=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#916=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#918=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#916,'DISTANCE_ACCURACY_VALUE','');
#920=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#918))GLOBAL_UNIT_ASSIGNED_CONTEXT((#908,#912,#916))REPRESENTATION_CONTEXT('None','None'));
#921=AXIS2_PLACEMENT_3D('',#922,#923,#924);
#922=CARTESIAN_POINT('',(0.0,0.0,0.0));
#923=DIRECTION('',(0.0,0.0,1.0));
#924=DIRECTION('',(1.0,0.0,0.0));
#925=SHAPE_REPRESENTATION('',(#921),#920);
#926=PRODUCT_DEFINITION_SHAPE('','',#896);
#927=SHAPE_DEFINITION_REPRESENTATION(#926,#925);
#933=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#934=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#935=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#933);
#939=(CONVERSION_BASED_UNIT('DEGREE',#935)NAMED_UNIT(#934)PLANE_ANGLE_UNIT());
#943=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#947=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#949=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#947,'DISTANCE_ACCURACY_VALUE','');
#951=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#949))GLOBAL_UNIT_ASSIGNED_CONTEXT((#939,#943,#947))REPRESENTATION_CONTEXT('','3D'));
#952=CARTESIAN_POINT('',(0.0,0.0,4.0));
#953=DIRECTION('',(0.0,0.0,1.0));
#954=DIRECTION('',(1.0,0.0,0.0));
#955=AXIS2_PLACEMENT_3D('',#952,#953,#954);
#956=CYLINDRICAL_SURFACE('',#955,9.550000000000001);
#957=CARTESIAN_POINT('',(9.550000000000001,0.0,6.000000000000001));
#958=VERTEX_POINT('',#957);
#959=CARTESIAN_POINT('',(0.0,0.0,6.000000000000001));
#960=DIRECTION('',(0.0,0.0,-1.0));
#961=DIRECTION('',(1.0,0.0,0.0));
#962=AXIS2_PLACEMENT_3D('',#959,#960,#961);
#963=CIRCLE('',#962,9.550000000000001);
#964=EDGE_CURVE('',#958,#958,#963,.T.);
#965=ORIENTED_EDGE('',*,*,#964,.F.);
#966=EDGE_LOOP('',(#965));
#967=FACE_OUTER_BOUND('',#966,.T.);
#968=CARTESIAN_POINT('',(9.550000000000001,0.0,2.0));
#969=VERTEX_POINT('',#968);
#970=CARTESIAN_POINT('',(0.0,0.0,2.0));
#971=DIRECTION('',(0.0,0.0,1.0));
#972=DIRECTION('',(1.0,0.0,0.0));
#973=AXIS2_PLACEMENT_3D('',#970,#971,#972);
#974=CIRCLE('',#973,9.550000000000001);
#975=EDGE_CURVE('',#969,#969,#974,.T.);
#976=ORIENTED_EDGE('',*,*,#975,.F.);
#977=EDGE_LOOP('',(#976));
#978=FACE_BOUND('',#977,.T.);
#979=ADVANCED_FACE('',(#967,#978),#956,.F.);
#980=CARTESIAN_POINT('',(0.0,0.0,2.0));
#981=DIRECTION('',(0.0,0.0,1.0));
#982=DIRECTION('',(1.0,0.0,0.0));
#983=AXIS2_PLACEMENT_3D('',#980,#981,#982);
#984=PLANE('',#983);
#985=ORIENTED_EDGE('',*,*,#975,.T.);
#986=EDGE_LOOP('',(#985));
#987=FACE_OUTER_BOUND('',#986,.T.);
#988=CARTESIAN_POINT('',(8.5,1.040950E-015,1.999999999999993));
#989=VERTEX_POINT('',#988);
#990=CARTESIAN_POINT('',(0.0,0.0,1.999999999999993));
#991=DIRECTION('',(0.0,0.0,1.0));
#992=DIRECTION('',(-1.0,0.0,0.0));
#993=AXIS2_PLACEMENT_3D('',#990,#991,#992);
#994=CIRCLE('',#993,8.5);
#995=EDGE_CURVE('',#989,#989,#994,.T.);
#996=ORIENTED_EDGE('',*,*,#995,.F.);
#997=EDGE_LOOP('',(#996));
#998=FACE_BOUND('',#997,.T.);
#999=ADVANCED_FACE('',(#987,#998),#984,.T.);
#1000=CARTESIAN_POINT('',(0.0,0.0,2.000000000000001));
#1001=DIRECTION('',(0.0,0.0,-1.0));
#1002=DIRECTION('',(-1.0,0.0,0.0));
#1003=AXIS2_PLACEMENT_3D('',#1000,#1001,#1002);
#1004=TOROIDAL_SURFACE('',#1003,25.199999999999999,4.0);
#1005=CARTESIAN_POINT('',(25.199999999999999,-3.086110E-015,6.000000000000001));
#1006=VERTEX_POINT('',#1005);
#1007=CARTESIAN_POINT('',(0.0,0.0,6.000000000000001));
#1008=DIRECTION('',(0.0,0.0,-1.0));
#1009=DIRECTION('',(-1.0,0.0,0.0));
#1010=AXIS2_PLACEMENT_3D('',#1007,#1008,#1009);
#1011=CIRCLE('',#1010,25.199999999999999);
#1012=EDGE_CURVE('',#1006,#1006,#1011,.T.);
#1013=ORIENTED_EDGE('',*,*,#1012,.T.);
#1014=EDGE_LOOP('',(#1013));
#1015=FACE_OUTER_BOUND('',#1014,.T.);
#1016=CARTESIAN_POINT('',(29.199999999999999,3.575969E-015,2.000000000000001));
#1017=VERTEX_POINT('',#1016);
#1018=CARTESIAN_POINT('',(0.0,0.0,2.000000000000001));
#1019=DIRECTION('',(0.0,0.0,1.0));
#1020=DIRECTION('',(-1.0,0.0,0.0));
#1021=AXIS2_PLACEMENT_3D('',#1018,#1019,#1020);
#1022=CIRCLE('',#1021,29.199999999999999);
#1023=EDGE_CURVE('',#1017,#1017,#1022,.T.);
#1024=ORIENTED_EDGE('',*,*,#1023,.T.);
#1025=EDGE_LOOP('',(#1024));
#1026=FACE_BOUND('',#1025,.T.);
#1027=ADVANCED_FACE('',(#1015,#1026),#1004,.T.);
#1028=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1029=DIRECTION('',(0.0,0.0,1.0));
#1030=DIRECTION('',(-1.0,0.0,0.0));
#1031=AXIS2_PLACEMENT_3D('',#1028,#1029,#1030);
#1032=CYLINDRICAL_SURFACE('',#1031,29.199999999999999);
#1033=CARTESIAN_POINT('',(-29.199999999999996,3.575969E-015,1.0));
#1034=VERTEX_POINT('',#1033);
#1035=CARTESIAN_POINT('',(0.0,0.0,1.0));
#1036=DIRECTION('',(0.0,0.0,1.0));
#1037=DIRECTION('',(-1.0,0.0,0.0));
#1038=AXIS2_PLACEMENT_3D('',#1035,#1036,#1037);
#1039=CIRCLE('',#1038,29.199999999999999);
#1040=EDGE_CURVE('',#1034,#1034,#1039,.T.);
#1041=ORIENTED_EDGE('',*,*,#1040,.T.);
#1042=EDGE_LOOP('',(#1041));
#1043=FACE_OUTER_BOUND('',#1042,.T.);
#1044=ORIENTED_EDGE('',*,*,#1023,.F.);
#1045=EDGE_LOOP('',(#1044));
#1046=FACE_BOUND('',#1045,.T.);
#1047=ADVANCED_FACE('',(#1043,#1046),#1032,.T.);
#1048=CARTESIAN_POINT('',(0.0,0.0,6.000000000000001));
#1049=DIRECTION('',(0.0,0.0,-1.0));
#1050=DIRECTION('',(-1.0,0.0,0.0));
#1051=AXIS2_PLACEMENT_3D('',#1048,#1049,#1050);
#1052=PLANE('',#1051);
#1053=ORIENTED_EDGE('',*,*,#1012,.F.);
#1054=EDGE_LOOP('',(#1053));
#1055=FACE_OUTER_BOUND('',#1054,.T.);
#1056=ORIENTED_EDGE('',*,*,#964,.T.);
#1057=EDGE_LOOP('',(#1056));
#1058=FACE_BOUND('',#1057,.T.);
#1059=ADVANCED_FACE('',(#1055,#1058),#1052,.F.);
#1060=CARTESIAN_POINT('',(0.0,0.0,0.499999999999998));
#1061=DIRECTION('',(0.0,0.0,-1.0));
#1062=DIRECTION('',(1.0,0.0,0.0));
#1063=AXIS2_PLACEMENT_3D('',#1060,#1061,#1062);
#1064=CONICAL_SURFACE('',#1063,9.000000000000002,45.000000000000099);
#1065=CARTESIAN_POINT('',(-8.5,-1.040950E-015,0.999999999999996));
#1066=VERTEX_POINT('',#1065);
#1067=CARTESIAN_POINT('',(0.0,0.0,0.999999999999996));
#1068=DIRECTION('',(0.0,0.0,1.0));
#1069=DIRECTION('',(1.0,0.0,0.0));
#1070=AXIS2_PLACEMENT_3D('',#1067,#1068,#1069);
#1071=CIRCLE('',#1070,8.5);
#1072=EDGE_CURVE('',#1066,#1066,#1071,.T.);
#1073=ORIENTED_EDGE('',*,*,#1072,.T.);
#1074=EDGE_LOOP('',(#1073));
#1075=FACE_OUTER_BOUND('',#1074,.T.);
#1076=CARTESIAN_POINT('',(-9.5,1.163414E-015,0.0));
#1077=VERTEX_POINT('',#1076);
#1078=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1079=DIRECTION('',(0.0,0.0,-1.0));
#1080=DIRECTION('',(1.0,0.0,0.0));
#1081=AXIS2_PLACEMENT_3D('',#1078,#1079,#1080);
#1082=CIRCLE('',#1081,9.5);
#1083=EDGE_CURVE('',#1077,#1077,#1082,.T.);
#1084=ORIENTED_EDGE('',*,*,#1083,.T.);
#1085=EDGE_LOOP('',(#1084));
#1086=FACE_BOUND('',#1085,.T.);
#1087=ADVANCED_FACE('',(#1075,#1086),#1064,.F.);
#1088=CARTESIAN_POINT('',(0.0,0.0,82.807729107855607));
#1089=DIRECTION('',(0.0,0.0,-1.0));
#1090=DIRECTION('',(-1.0,0.0,0.0));
#1091=AXIS2_PLACEMENT_3D('',#1088,#1089,#1090);
#1092=CYLINDRICAL_SURFACE('',#1091,8.5);
#1093=ORIENTED_EDGE('',*,*,#995,.T.);
#1094=EDGE_LOOP('',(#1093));
#1095=FACE_OUTER_BOUND('',#1094,.T.);
#1096=ORIENTED_EDGE('',*,*,#1072,.F.);
#1097=EDGE_LOOP('',(#1096));
#1098=FACE_BOUND('',#1097,.T.);
#1099=ADVANCED_FACE('',(#1095,#1098),#1092,.F.);
#1100=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1101=DIRECTION('',(0.0,0.0,-1.0));
#1102=DIRECTION('',(-1.0,0.0,0.0));
#1103=AXIS2_PLACEMENT_3D('',#1100,#1101,#1102);
#1104=PLANE('',#1103);
#1105=CARTESIAN_POINT('',(-23.850000000000001,2.920783E-015,0.0));
#1106=VERTEX_POINT('',#1105);
#1107=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1108=DIRECTION('',(0.0,0.0,-1.0));
#1109=DIRECTION('',(1.0,0.0,0.0));
#1110=AXIS2_PLACEMENT_3D('',#1107,#1108,#1109);
#1111=CIRCLE('',#1110,23.850000000000001);
#1112=EDGE_CURVE('',#1106,#1106,#1111,.T.);
#1113=ORIENTED_EDGE('',*,*,#1112,.T.);
#1114=EDGE_LOOP('',(#1113));
#1115=FACE_OUTER_BOUND('',#1114,.T.);
#1116=ORIENTED_EDGE('',*,*,#1083,.F.);
#1117=EDGE_LOOP('',(#1116));
#1118=FACE_BOUND('',#1117,.T.);
#1119=ADVANCED_FACE('',(#1115,#1118),#1104,.T.);
#1120=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1121=DIRECTION('',(0.0,0.0,1.0));
#1122=DIRECTION('',(1.0,0.0,0.0));
#1123=AXIS2_PLACEMENT_3D('',#1120,#1121,#1122);
#1124=CYLINDRICAL_SURFACE('',#1123,23.850000000000001);
#1125=CARTESIAN_POINT('',(-23.850000000000001,2.920783E-015,1.0));
#1126=VERTEX_POINT('',#1125);
#1127=CARTESIAN_POINT('',(0.0,0.0,1.0));
#1128=DIRECTION('',(0.0,0.0,-1.0));
#1129=DIRECTION('',(1.0,0.0,0.0));
#1130=AXIS2_PLACEMENT_3D('',#1127,#1128,#1129);
#1131=CIRCLE('',#1130,23.850000000000001);
#1132=EDGE_CURVE('',#1126,#1126,#1131,.T.);
#1133=ORIENTED_EDGE('',*,*,#1132,.T.);
#1134=EDGE_LOOP('',(#1133));
#1135=FACE_OUTER_BOUND('',#1134,.T.);
#1136=ORIENTED_EDGE('',*,*,#1112,.F.);
#1137=EDGE_LOOP('',(#1136));
#1138=FACE_BOUND('',#1137,.T.);
#1139=ADVANCED_FACE('',(#1135,#1138),#1124,.T.);
#1140=CARTESIAN_POINT('',(0.0,0.0,1.0));
#1141=DIRECTION('',(0.0,0.0,1.0));
#1142=DIRECTION('',(1.0,0.0,0.0));
#1143=AXIS2_PLACEMENT_3D('',#1140,#1141,#1142);
#1144=PLANE('',#1143);
#1145=ORIENTED_EDGE('',*,*,#1040,.F.);
#1146=EDGE_LOOP('',(#1145));
#1147=FACE_OUTER_BOUND('',#1146,.T.);
#1148=ORIENTED_EDGE('',*,*,#1132,.F.);
#1149=EDGE_LOOP('',(#1148));
#1150=FACE_BOUND('',#1149,.T.);
#1151=ADVANCED_FACE('',(#1147,#1150),#1144,.F.);
#1152=CLOSED_SHELL('',(#979,#999,#1027,#1047,#1059,#1087,#1099,#1119,#1139,#1151));
#1153=MANIFOLD_SOLID_BREP('Solid1',#1152);
#1154=COLOUR_RGB('Red (Clear)',0.831372976303101,0.0,0.0);
#1155=FILL_AREA_STYLE_COLOUR('Red (Clear)',#1154);
#1156=FILL_AREA_STYLE('Red (Clear)',(#1155));
#1157=SURFACE_STYLE_FILL_AREA(#1156);
#1158=SURFACE_SIDE_STYLE('Red (Clear)',(#1157));
#1159=SURFACE_STYLE_USAGE(.BOTH.,#1158);
#1160=PRESENTATION_STYLE_ASSIGNMENT((#1159));
#1161=STYLED_ITEM('',(#1160),#1153);
#1162=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#1153),#920);
#1163=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#1162,#925);
#1164=AXIS2_PLACEMENT_3D('',#1165,#1166,#1167);
#1165=CARTESIAN_POINT('',(0.050000000000013,-1.914000E-015,14.299999999999981));
#1166=DIRECTION('',(-1.166746E-015,1.919257E-015,-0.999999999999991));
#1167=DIRECTION('',(-0.994949544812308,-0.100376308348965,1.077660E-015));
#1168=NEXT_ASSEMBLY_USAGE_OCCURRENCE('AL-731:1','AL-731:1','AL-731:1',#12,#896,'AL-731:1');
#1169=PRODUCT_DEFINITION_SHAPE('AL-731:1','AL-731:1',#1168);
#1170=ITEM_DEFINED_TRANSFORMATION('AL-731:1','AL-731:1',#921,#1164);
#1174=(REPRESENTATION_RELATIONSHIP('AL-731:1','AL-731:1',#925,#41)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1170)SHAPE_REPRESENTATION_RELATIONSHIP());
#1175=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1174,#1169);
#1176=APPLICATION_CONTEXT('automotive design');
#1177=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#1176);
#1178=PRODUCT_CONTEXT('',#1176,'mechanical');
#1179=PRODUCT('AL-730_1','AL-730_1',$,(#1178));
#1180=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1179));
#1181=PRODUCT_DEFINITION_FORMATION('',$,#1179);
#1182=PRODUCT_DEFINITION_CONTEXT('part definition',#1176,'design');
#1183=PRODUCT_DEFINITION('',$,#1181,#1182);
#1189=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1190=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#1191=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#1189);
#1195=(CONVERSION_BASED_UNIT('DEGREE',#1191)NAMED_UNIT(#1190)PLANE_ANGLE_UNIT());
#1199=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1203=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1205=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#1203,'DISTANCE_ACCURACY_VALUE','');
#1207=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1205))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1195,#1199,#1203))REPRESENTATION_CONTEXT('None','None'));
#1208=AXIS2_PLACEMENT_3D('',#1209,#1210,#1211);
#1209=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1210=DIRECTION('',(0.0,0.0,1.0));
#1211=DIRECTION('',(1.0,0.0,0.0));
#1212=SHAPE_REPRESENTATION('',(#1208),#1207);
#1213=PRODUCT_DEFINITION_SHAPE('','',#1183);
#1214=SHAPE_DEFINITION_REPRESENTATION(#1213,#1212);
#1220=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1221=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
#1222=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#1220);
#1226=(CONVERSION_BASED_UNIT('DEGREE',#1222)NAMED_UNIT(#1221)PLANE_ANGLE_UNIT());
#1230=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1234=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1236=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#1234,'DISTANCE_ACCURACY_VALUE','');
#1238=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1236))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1226,#1230,#1234))REPRESENTATION_CONTEXT('','3D'));
#1239=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1240=DIRECTION('',(0.0,0.0,1.0));
#1241=DIRECTION('',(-1.0,0.0,0.0));
#1242=AXIS2_PLACEMENT_3D('',#1239,#1240,#1241);
#1243=CYLINDRICAL_SURFACE('',#1242,8.325000000000001);
#1244=CARTESIAN_POINT('',(8.325000000000001,1.019518E-015,36.649999999999999));
#1245=VERTEX_POINT('',#1244);
#1246=CARTESIAN_POINT('',(0.0,0.0,36.649999999999999));
#1247=DIRECTION('',(0.0,0.0,-1.0));
#1248=DIRECTION('',(-1.0,0.0,0.0));
#1249=AXIS2_PLACEMENT_3D('',#1246,#1247,#1248);
#1250=CIRCLE('',#1249,8.325000000000001);
#1251=EDGE_CURVE('',#1245,#1245,#1250,.T.);
#1252=ORIENTED_EDGE('',*,*,#1251,.F.);
#1253=EDGE_LOOP('',(#1252));
#1254=FACE_OUTER_BOUND('',#1253,.T.);
#1255=CARTESIAN_POINT('',(8.325000000000001,1.019518E-015,0.0));
#1256=VERTEX_POINT('',#1255);
#1257=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1258=DIRECTION('',(0.0,0.0,1.0));
#1259=DIRECTION('',(-1.0,0.0,0.0));
#1260=AXIS2_PLACEMENT_3D('',#1257,#1258,#1259);
#1261=CIRCLE('',#1260,8.325000000000001);
#1262=EDGE_CURVE('',#1256,#1256,#1261,.T.);
#1263=ORIENTED_EDGE('',*,*,#1262,.F.);
#1264=EDGE_LOOP('',(#1263));
#1265=FACE_BOUND('',#1264,.T.);
#1266=ADVANCED_FACE('',(#1254,#1265),#1243,.F.);
#1267=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1268=DIRECTION('',(0.0,0.0,1.0));
#1269=DIRECTION('',(-1.0,0.0,0.0));
#1270=AXIS2_PLACEMENT_3D('',#1267,#1268,#1269);
#1271=CYLINDRICAL_SURFACE('',#1270,9.525000000000002);
#1272=CARTESIAN_POINT('',(9.525000000000002,1.166476E-015,36.649999999999999));
#1273=VERTEX_POINT('',#1272);
#1274=CARTESIAN_POINT('',(0.0,0.0,36.649999999999999));
#1275=DIRECTION('',(0.0,0.0,-1.0));
#1276=DIRECTION('',(-1.0,0.0,0.0));
#1277=AXIS2_PLACEMENT_3D('',#1274,#1275,#1276);
#1278=CIRCLE('',#1277,9.525000000000002);
#1279=EDGE_CURVE('',#1273,#1273,#1278,.T.);
#1280=ORIENTED_EDGE('',*,*,#1279,.T.);
#1281=EDGE_LOOP('',(#1280));
#1282=FACE_OUTER_BOUND('',#1281,.T.);
#1283=CARTESIAN_POINT('',(9.525000000000002,1.166476E-015,0.0));
#1284=VERTEX_POINT('',#1283);
#1285=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1286=DIRECTION('',(0.0,0.0,-1.0));
#1287=DIRECTION('',(-1.0,0.0,0.0));
#1288=AXIS2_PLACEMENT_3D('',#1285,#1286,#1287);
#1289=CIRCLE('',#1288,9.525000000000002);
#1290=EDGE_CURVE('',#1284,#1284,#1289,.T.);
#1291=ORIENTED_EDGE('',*,*,#1290,.F.);
#1292=EDGE_LOOP('',(#1291));
#1293=FACE_BOUND('',#1292,.T.);
#1294=ADVANCED_FACE('',(#1282,#1293),#1271,.T.);
#1295=CARTESIAN_POINT('',(0.0,0.0,36.649999999999999));
#1296=DIRECTION('',(0.0,0.0,-1.0));
#1297=DIRECTION('',(-1.0,0.0,0.0));
#1298=AXIS2_PLACEMENT_3D('',#1295,#1296,#1297);
#1299=PLANE('',#1298);
#1300=ORIENTED_EDGE('',*,*,#1279,.F.);
#1301=EDGE_LOOP('',(#1300));
#1302=FACE_OUTER_BOUND('',#1301,.T.);
#1303=ORIENTED_EDGE('',*,*,#1251,.T.);
#1304=EDGE_LOOP('',(#1303));
#1305=FACE_BOUND('',#1304,.T.);
#1306=ADVANCED_FACE('',(#1302,#1305),#1299,.F.);
#1307=CARTESIAN_POINT('',(0.0,0.0,0.0));
#1308=DIRECTION('',(0.0,0.0,-1.0));
#1309=DIRECTION('',(-1.0,0.0,0.0));
#1310=AXIS2_PLACEMENT_3D('',#1307,#1308,#1309);
#1311=PLANE('',#1310);
#1312=ORIENTED_EDGE('',*,*,#1290,.T.);
#1313=EDGE_LOOP('',(#1312));
#1314=FACE_OUTER_BOUND('',#1313,.T.);
#1315=ORIENTED_EDGE('',*,*,#1262,.T.);
#1316=EDGE_LOOP('',(#1315));
#1317=FACE_BOUND('',#1316,.T.);
#1318=ADVANCED_FACE('',(#1314,#1317),#1311,.T.);
#1319=CLOSED_SHELL('',(#1266,#1294,#1306,#1318));
#1320=MANIFOLD_SOLID_BREP('Solid1',#1319);
#1321=COLOUR_RGB('Metal-Steel',0.639216005802155,0.639216005802155,0.686275005340576);
#1322=FILL_AREA_STYLE_COLOUR('Metal-Steel',#1321);
#1323=FILL_AREA_STYLE('Metal-Steel',(#1322));
#1324=SURFACE_STYLE_FILL_AREA(#1323);
#1325=SURFACE_SIDE_STYLE('Metal-Steel',(#1324));
#1326=SURFACE_STYLE_USAGE(.BOTH.,#1325);
#1327=PRESENTATION_STYLE_ASSIGNMENT((#1326));
#1328=STYLED_ITEM('',(#1327),#1320);
#1329=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#1320),#1207);
#1330=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#1329,#1212);
#1331=AXIS2_PLACEMENT_3D('',#1332,#1333,#1334);
#1332=CARTESIAN_POINT('',(0.050000000000002,1.933825E-015,-24.350000000000001));
#1333=DIRECTION('',(1.485704E-016,7.534238E-031,1.0));
#1334=DIRECTION('',(0.862993012181512,-0.505215855774422,-1.282152E-016));
#1335=NEXT_ASSEMBLY_USAGE_OCCURRENCE('AL-730_1:1','AL-730_1:1','AL-730_1:1',#12,#1183,'AL-730_1:1');
#1336=PRODUCT_DEFINITION_SHAPE('AL-730_1:1','AL-730_1:1',#1335);
#1337=ITEM_DEFINED_TRANSFORMATION('AL-730_1:1','AL-730_1:1',#1208,#1331);
#1341=(REPRESENTATION_RELATIONSHIP('AL-730_1:1','AL-730_1:1',#1212,#41)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1337)SHAPE_REPRESENTATION_RELATIONSHIP());
#1342=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1341,#1336);
ENDSEC;
END-ISO-10303-21;